West AK, CA, NV, OR, UT, HI, WA, ID

Help with clearing corners (Los Angele Area)

Thread Tools
 
Search this Thread
 
  #31  
Old 10-25-2007 | 06:14 PM
.clipse's Avatar
SoCal Crew Member
Joined: Nov 2006
Posts: 3,819
From: L.A.
Default RE: Help with clearing corners (Los Angele Area)

ORIGINAL: i3uddha


I'll still bring big Matilda my sledge for Marks CC [:-]

i hope those CC's stand for credit cards. i've been spending too much on them [:@]i cant afford your $5 audiforums decals
 
  #32  
Old 10-25-2007 | 06:19 PM
mra's Avatar
mra
Thread Starter
|
1st Gear
Joined: Sep 2007
Posts: 27
Default RE: Help with clearing corners (Los Angele Area)

Here is a similar picture of the holes, but it's from the audiworld tech articles:

http://www.audiworld.com/tech/pics/ext40-viewofhole.jpg

Thanks for the DIY for the turn signal lights, I'll do that right after I get myself a Torx 25 screwdriver. :-D
 
  #33  
Old 10-25-2007 | 06:38 PM
i3uddha's Avatar
Site Moderator/Ninja
Joined: Aug 2005
Posts: 7,681
From: SoCaL~
Default RE: Help with clearing corners (Los Angele Area)

[] ouch...


what did u use - the silicone stuff? make sure no condensation can get into the housing...
 
  #34  
Old 10-25-2007 | 06:54 PM
mra's Avatar
mra
Thread Starter
|
1st Gear
Joined: Sep 2007
Posts: 27
Default RE: Help with clearing corners (Los Angele Area)

Ya after the drilling, clear silicone sealant was added. I'm guessing we drilled too much, is there a way to cover this up or do I have to get ecodes?

I thought the hole was a natural result of this mod after I saw the article on audiworld. It doesn't look all that bad, but if you're close you can see it and the clean look is not there. :-/
 
  #35  
Old 10-25-2007 | 08:39 PM
Superdug's Avatar
SoCal Crew Member/White Devil
Joined: Mar 2006
Posts: 2,501
From: Nor Cal (559)
Default RE: Help with clearing corners (Los Angele Area)

if you do it just right the only thing left will be the tab holes but if you go to far you will get a drill hole. either way there is a hole.
 
  #36  
Old 10-26-2007 | 01:51 PM
i3uddha's Avatar
Site Moderator/Ninja
Joined: Aug 2005
Posts: 7,681
From: SoCaL~
Default RE: Help with clearing corners (Los Angele Area)

yeah - I just ate away at the tabs - no holes for me...

but if u have the sealant in there - its allg ood - unless ure really itching to burn
some $$ its like $800 to get new headlights...[:'(] I'd put that towrads C/o's or exhaust etc..


 
  #37  
Old 10-26-2007 | 01:53 PM
Superdug's Avatar
SoCal Crew Member/White Devil
Joined: Mar 2006
Posts: 2,501
From: Nor Cal (559)
Default RE: Help with clearing corners (Los Angele Area)

agreed
 
  #38  
Old 10-27-2007 | 10:33 PM
mra's Avatar
mra
Thread Starter
|
1st Gear
Joined: Sep 2007
Posts: 27
Default RE: Help with clearing corners (Los Angele Area)

As long as there was suppose to be a sligh imperction, then thats all I had to hear. I just finished disabling the turn signal light when the headlights are on. Looks a lot better.

Thanks for all the help
 
  #39  
Old 10-28-2007 | 05:37 PM
mra's Avatar
mra
Thread Starter
|
1st Gear
Joined: Sep 2007
Posts: 27
Default RE: Help with clearing corners (Los Angele Area)

Weird right after I did the disabling of the turn signal mod, after I turned on my headlights I got this error, right parking light and left parking light. Not sure if this is related, it might be the rear lights again, even though I changed them two months ago, I don't remember if they were the same ones though.

Edit: I posted a better description of my problem here: https://www.audiforums.com/m_689008/tm.htm
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
knyks342
B5 Models
1
07-21-2011 07:21 PM
morrisonjd84
Audi A4
2
10-23-2007 11:19 PM
ALL*AUDI
Audi A4
20
11-04-2005 01:44 PM
Talis
Audi A4
15
08-30-2005 11:26 AM
mainer
Audi A4
4
03-13-2005 10:14 PM



Quick Reply: Help with clearing corners (Los Angele Area)



All times are GMT -4. The time now is 09:42 AM.