Need some advice on control arms/kits etc
#1
02-20-2012, 11:36 PM
Need some advice on control arms/kits etc
Hey I've been researching different possibilities concerning control arms on my Audi A4 and was just curious if I could get some opinions on what to do.
1. A control arm kit with all new arms and everything but tend to be quite expensive
2. A control arm bushing replacement seems to be the cheapest solution but i dont have a shop press and what if the rubber boot around the arm ball joint is shot? How do you replace that?
3. A random question: Which control arms are the most important to be replaced?
If you guys could give me some insight on this, it'd be greatly appreciated.
1. A control arm kit with all new arms and everything but tend to be quite expensive
2. A control arm bushing replacement seems to be the cheapest solution but i dont have a shop press and what if the rubber boot around the arm ball joint is shot? How do you replace that?
3. A random question: Which control arms are the most important to be replaced?
If you guys could give me some insight on this, it'd be greatly appreciated.
#2
02-21-2012, 04:23 PM
They all are important, and you can get a full kit from FCP Groton for a couple hundred bucks. A lot of us use their kit happily.
Thread
Thread Starter
Forum
Replies
Last Post
jdahlen24
DIY - Do It Yourself
5
08-25-2011 09:50 PM
jdahlen24
DIY - Do It Yourself
0
08-25-2011 03:05 PM
