getting a MAF cel but car seems to run fine
#1
getting a MAF cel but car seems to run fine
Hey guys, I have a '00 Audi A6 Quattro 2.7T and I'm getting the codes p0102, p1137, and p1139 which say MAF low input and fuel trim too rich. The car seems to be running fine though. I tried cleaning the MAF when I replaced my air filter but codes came back. I unplugged the MAF and drove the car a bit and it ran the same with the MAF unplugged. If the MAF was bad wouldn't the car be running like crap? I don't wanna replace the MAF if that's not gonna clear my codes. Any advice on where to go from here would be great, thanks!
Last edited by lespaul1921; 06-13-2011 at 12:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
daze614
B5 Models
7
02-19-2012 08:24 PM
Audirican62
Archive - Engine/Performance Parts
0
07-03-2006 07:31 PM