Today's mod - HID foglights
#41
Yeah. It's a minor issue. In the pre-facelift cars the two horns sit down low in front on the passenger side, next to the SAP. One of them is in the way when you install the foglight on that side. You can bend the bracket to reposition the horn or you can just move it back and outward. That's what I did. I took it off the bracket, and resecured it to something else farther out of the way. Takes less than five minutes and requires the mental capabilities of a wet sandwich. Don't sweat it
#43
The wiring is a walk in the park. The HID high-voltage cables are idiot-proof by design and you only have to add two wires per side - one goes from the black bulb trigger wire to the chassis and the other goes from the red bulb trigger wire to the green/yellow fog wire in the headlight harness (you use the wiretap to connect to it). Literally that's it - my mother could install them.
#46
don't forget to get the right bulb size for the ebay kit as it says H3 NOT H7. it'll work fine but just remember to tell the ebay seller the right size.
Jeremy, i think you need to do a writeup with pics for people who have very little experience with this. unless you're trying to catch up to my post count of course hehe
Jeremy, i think you need to do a writeup with pics for people who have very little experience with this. unless you're trying to catch up to my post count of course hehe