Subwoofer install *Pics*
#11
The box is that size because it is tuned to a certain frequency with the port size and it needs to be that big to sound right.
Keegan if you could post those pictures in here that would be great, I've been thinking of how I'm going to mount it so any outside ideas would be great!
Keegan if you could post those pictures in here that would be great, I've been thinking of how I'm going to mount it so any outside ideas would be great!
#15
Very clean install. That 0 gauge is crazy haha. I'm running a pair of kicker 12s rated for 1000watt each at 2ohm and I'm only using a 300watt multichannel amp powering it lol. I can't seem to find a good deal on a good amp. Still pounds pretty well. I used rubber faucet pieces for my license plates. No rattle at all.
#17
1000 watt amp is roughly 160 amps... a 4g wire is rated at 150amp or even a 2g wire at 225amps. A 0g is rated around 350amps which is more than 2x the Amplifier can pull... Hence why I said overkill. But as long as it sounds good
#20
http://picasaweb.google.com/Keegan0103/Audi#
I cant resize my pictures, so I just put them up here. I used 3 feet of fencing material, and got a screw through the fencing, through the rear tie down, and into my box. Did this on each side and one in the middle just for security. an added bonus is you can still raise the box and get the spare tire. also showed the screw size and my crappy amp. If you need, I can take more
I cant resize my pictures, so I just put them up here. I used 3 feet of fencing material, and got a screw through the fencing, through the rear tie down, and into my box. Did this on each side and one in the middle just for security. an added bonus is you can still raise the box and get the spare tire. also showed the screw size and my crappy amp. If you need, I can take more
Thread
Thread Starter
Forum
Replies
Last Post