Problems after Test Pipe
#11
RE: Problems after Test Pipe
Sick car.. I'm diappointed in the low numbers from a T28, I was hoping I can pull 300 from it.
What kind of 60' do you pull with you car? Ever try and stutterbox or anti-lag setups for launches? I think thats the 1st Audi i've seen in the 10s thats streetable.
Back to my car, can a boost controller need to be installed? I went WOT a few times today and the car has been running excellent other than the loose WG arm.
Thanks to both of you for your help so far. I've made a few posts on the Vortex forums and got a bunch of newbies that knew less than me or no replys at all.
-Mike
What kind of 60' do you pull with you car? Ever try and stutterbox or anti-lag setups for launches? I think thats the 1st Audi i've seen in the 10s thats streetable.
Back to my car, can a boost controller need to be installed? I went WOT a few times today and the car has been running excellent other than the loose WG arm.
Thanks to both of you for your help so far. I've made a few posts on the Vortex forums and got a bunch of newbies that knew less than me or no replys at all.
-Mike
#12
RE: Problems after Test Pipe
ORIGINAL: AWD4g63
Sick car.. I'm diappointed in the low numbers from a T28, I was hoping I can pull 300 from it.
What kind of 60' do you pull with you car? Ever try and stutterbox or anti-lag setups for launches? I think thats the 1st Audi i've seen in the 10s thats streetable.
Back to my car, can a boost controller need to be installed? I went WOT a few times today and the car has been running excellent other than the loose WG arm.
Thanks to both of you for your help so far. I've made a few posts on the Vortex forums and got a bunch of newbies that knew less than me or no replys at all.
-Mike
Sick car.. I'm diappointed in the low numbers from a T28, I was hoping I can pull 300 from it.
What kind of 60' do you pull with you car? Ever try and stutterbox or anti-lag setups for launches? I think thats the 1st Audi i've seen in the 10s thats streetable.
Back to my car, can a boost controller need to be installed? I went WOT a few times today and the car has been running excellent other than the loose WG arm.
Thanks to both of you for your help so far. I've made a few posts on the Vortex forums and got a bunch of newbies that knew less than me or no replys at all.
-Mike
I used the anti-lag on my old tune(80 less hp) to pull 1.5's, new tune I have pulled 1.5's without the anti-lag but I do plan on trying it again at some point.
A EBC works great with the T28 or larger turbos in the A4.
#15
RE: Problems after Test Pipe
Car has been running great. I've had a greddy type s sitting in the garage for a while now so I bought and adapter and put it on the Audi. After it was installed the boost dropped to about 10 psi. Made sure all the fitting and recirculation hose was tight and went for another ride. Same thing boost is much lower. I then put the stock one back on and it runs 14 again. Any idea why the car would do that?
Thanks,
Mike
Thanks,
Mike
#16
RE: Problems after Test Pipe
ORIGINAL: AWD4g63
Car has been running great. I've had a greddy type s sitting in the garage for a while now so I bought and adapter and put it on the Audi. After it was installed the boost dropped to about 10 psi. Made sure all the fitting and recirculation hose was tight and went for another ride. Same thing boost is much lower. I then put the stock one back on and it runs 14 again. Any idea why the car would do that?
Thanks,
Mike
Car has been running great. I've had a greddy type s sitting in the garage for a while now so I bought and adapter and put it on the Audi. After it was installed the boost dropped to about 10 psi. Made sure all the fitting and recirculation hose was tight and went for another ride. Same thing boost is much lower. I then put the stock one back on and it runs 14 again. Any idea why the car would do that?
Thanks,
Mike
It must not be staying fully closed, did you increase the spring tension with the nut on top?
#17
RE: Problems after Test Pipe
Yea, first I tried it with both springs in and adjusted the nut and I kept getting compressor surge. Removed a spring and adjusted the tension and got it pretty good but it was still boosting low.
I guess I'm going to buy a forge or something else. Any reccomendations?
I guess I'm going to buy a forge or something else. Any reccomendations?
#20
Since I got some good info from 2 guys in this thread I'll ask another question about a problem i'm having. A few posts up I mentioned about my WG arm rattling. It got to the point that not its constantly open and dumps all boost. I reached behind the turbo and I can move the arm open and closed. Is this because the nut came looks or is there a problem with the actuator? I'm used to running an external gat and have not had too much experience on the internal. I'd like to know what I have to look forward to once I remove the turbo.
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
greenday
Archive - Engine/Performance Parts
3
11-29-2005 03:43 PM