A few little engine problems....Codes
#1
A few little engine problems....Codes
So I got my car scanned today and it came up with some misfires in random/multiples. Its a 2000 A4 1.8T. Recently put in a Giac. The Plugs are new and gapped at .28. Could it be my coilpacks? And does anyone know about recalls on those and if I have one? Ill post up the codes soon.
#2
if your running stock plugs which you shouldnt they should be gapped at .032 since your chipped you should be running colder plugs ngk bkr7e gaped at .028. u said ur still running stock plugs right? some one chip in and help this guy out get his car back to tip top shape hes a pretty cool kid and i wanna see his troubles disapear so bump for a cool guy!
#3
i ran coppers gapped at 28 with my apr, but even "stock" plugs gapped at 28 or 32 should work without misses.... i would say you are looking at coils....... about the "free" packs i am not sure, call your dealership and ask them, have your vin ready for them.....
they say for tuned cars you need 28.... and colder plugs..... but for just tuned that is not a given
they say for tuned cars you need 28.... and colder plugs..... but for just tuned that is not a given
#8
Dont mind the first one. Its just my ABS module which is fried and is getting fixed soon once i get all this other crap fixed first hah. But come on guys, I don't feel like taking my car to a dealer or shop so i can spend hundreds of bucks
#9
ok, for the first part, the new r packs(i think) are supposed the be the best yet..... i had some sti's and they weren't what i expected
as for the codes, post what they mean as well and you will get more replies
as for the codes, post what they mean as well and you will get more replies
#10
Okay well here is what they mean
p1128- Long Term Fuel Trim mult.,Bank1 System too Lean
p1114- Bank1-Sensor2 Internal Resistant too High
p1602- Power Supply (B+) Terminal 30 Low Voltage
p0300- Random/Multiple Cylinder Misfire Detected
p0301- Cyl.1 Misfire Detected
p0304- Cyl.4 Misfire Detected
Now this is only saying cylinder 1 and cylinder 4. Does that mean I can just replace two single coil packs? Btw thanks turbo kraut. so far your my only help ha!
I found these two links. Which is better, the "R" or the "E"?
http://www.ecstuning.com/Audi-B5_A4-...tion/ES252896/
http://www.ecstuning.com/Audi-B5_A4-...tion/ES518032/
p1128- Long Term Fuel Trim mult.,Bank1 System too Lean
p1114- Bank1-Sensor2 Internal Resistant too High
p1602- Power Supply (B+) Terminal 30 Low Voltage
p0300- Random/Multiple Cylinder Misfire Detected
p0301- Cyl.1 Misfire Detected
p0304- Cyl.4 Misfire Detected
Now this is only saying cylinder 1 and cylinder 4. Does that mean I can just replace two single coil packs? Btw thanks turbo kraut. so far your my only help ha!
I found these two links. Which is better, the "R" or the "E"?
http://www.ecstuning.com/Audi-B5_A4-...tion/ES252896/
http://www.ecstuning.com/Audi-B5_A4-...tion/ES518032/
Last edited by Baby Kito; 06-29-2010 at 10:37 AM.