bumper is pissing me off
#12
Simple fix everyone. There are only 3 or 4 screws holding that mouning bracket in place. Adjust the way it sits and make sure you are setting the bumper into those side mounts the right way. This is the most common error. Get the bottom to grab first before popping on the top. And a lot of times they bend a little from being improperly removed. Just bend it back and add BJ weld if it's really worn down so the clips don't keep slipping off.
#13
Simple fix everyone. There are only 3 or 4 screws holding that mouning bracket in place. Adjust the way it sits and make sure you are setting the bumper into those side mounts the right way. This is the most common error. Get the bottom to grab first before popping on the top. And a lot of times they bend a little from being improperly removed. Just bend it back and add BJ weld if it's really worn down so the clips don't keep slipping off.
#17
Had the same issue, I just put a screw in to stop it. Put the bumper in place, then if you look in the wheel well the plastic fender shield overlaps with the bumper for the thru-bolts, you can put a wood screw thru, out of sight. holds it.
Thread
Thread Starter
Forum
Replies
Last Post