2000 Audi A4 2.8 30V (Build)
#21
MINI UPDATE (Body Work)
So i finally got around to replacing damaged drivers side fender that PO must have gotten into an accident with. Also there was some sun damage on top part of fender. THe total job took 1 day of prep work on new fender between scuffing, priming, painting, drying. Then literally 1 day of taking off old fender that was a PITA between rusty top side Torx bolts (nothing a hammer and some elbow grease didnt fix ), inspections plates, safety plates, oddly placed bolts and headlight assembly. I ended up replacing rusty torx bits with 10mm american.
Here is a picture of fender on. Sun damage but the real damage was on bottom of fender where it was crushed in. Replaced washer fluid pump and cleaned up metal flakes PO must have never cared to check damage from crash. Also notice how the headlight is not flush with fender
New Fender (dont mind dirty car this is first picture taken upon completion of job)
Anyway i will post a side profile picture of car when i have a minute. Also i need suggestions should i repaint hood or go with an invader CF hood? Also next project will be interior and summer wheels !
Here is a picture of fender on. Sun damage but the real damage was on bottom of fender where it was crushed in. Replaced washer fluid pump and cleaned up metal flakes PO must have never cared to check damage from crash. Also notice how the headlight is not flush with fender
New Fender (dont mind dirty car this is first picture taken upon completion of job)
Anyway i will post a side profile picture of car when i have a minute. Also i need suggestions should i repaint hood or go with an invader CF hood? Also next project will be interior and summer wheels !
#27
My ride lowered (photshopped by Cgoon009 over on Audizine....but yeah i am in love with the stance. HOpefully will have this within a month...i have been suggested both ST COILOVERS obviously or vogtlands..anyone have advice/recomendations/previous experience with either?
BEFORE PHOTO (how it sits now)
heres the ride photoshopped (lowered)
[/QUOTE]
BEFORE PHOTO (how it sits now)
heres the ride photoshopped (lowered)
[/QUOTE]
#28
Hey man is that a strut brace on the inside of your engine bay its red and goes over the battery? Btw nice car man i have a 98 2.8 as well its getting there mods wise i had to do a lot of maintenance work before i started the mods :/. I do have it on Raceland coils with 15mm spacers, clear corners, and a K&N short ram intake. Custom exhaust and Magnaflow muffler coming soon!
#29
Hey man is that a strut brace on the inside of your engine bay its red and goes over the battery? Btw nice car man i have a 98 2.8 as well its getting there mods wise i had to do a lot of maintenance work before i started the mods :/. I do have it on Raceland coils with 15mm spacers, clear corners, and a K&N short ram intake. Custom exhaust and Magnaflow muffler coming soon!
#30
I have had them on for about a month now and i love them. They ride real nice for what you pay for and if your looking for stance they go pretty damn low. I would recommend getting new upper strut mounts, thats what i did and i feel like it really made a difference compared to using the old ones. The old ones tend to squeak but replacing them takes that away. And nice man ill have to check that out on the first page. Thanks and good luck with your ride