My car has just hit me with this again.......
I done the linkages in December and car has done approx. 3000 miles now on (47994 miles)
It's the 3.0Tdi CAPAengine

Address 03: ABS Brakes (J104) Labels: 8K0-907-379.clb
Part No SW: 8K0 907 379 J HW: 8K0 907 379 J
Component: ESP8 quattro H03 0190
Revision: -------- Serial number: --------------
Coding: 1B4500
Shop #: WSC 06325 000 00000
VCID: 40855ED9D398E29

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J393) Labels: 8K0-907-064-05.clb
Part No SW: 8K0 907 289 D HW: 8K0 907 289 D
Component: BCM2.01 H37 0253
Revision: 00002001
Coding: 071000
Shop #: WSC 06325 000 00000
VCID: 3A712C31B544B89

Subsystem 1 - Part No SW: 8K0 905 852 A HW: 8K0 905 852 A
Component: ELVAUDIB8 H33 0039

Which side is bank 1 is it the turbo side on drivers side to clarify (UK RHD car).
Any ideas what to do next.



Is this my best option and how hard is it to get to swirl flaps if this the case???
Is it a DIY or not???