Turbo Upgrade Round 2
#52
RE: Turbo Upgrade Round 2
yeah same as mine. the pic I showed look like one of the end which suppose to connect to do oil pan. if you do it opposide way, there is no way you can fit it in to the oil pan. that's what I try to meant.
I just rememered, I used metal clamps to fit it right before I screw it.
I know pic is suck but you got the point I think. I tight the screw on the clamp to adjust the return line to the hole on the oil pan.
I just rememered, I used metal clamps to fit it right before I screw it.
I know pic is suck but you got the point I think. I tight the screw on the clamp to adjust the return line to the hole on the oil pan.
#56
RE: Turbo Upgrade Round 2
Thats why im glad my dad owns a caterpillar dealer, when i do my kit i can just go make a new steel braided hose and get those AN fittings and adapters
ORIGINAL: BaconBait
I know where it goes and how it needs to be installed. Mine is one piece and part of it is hitting the AC compressor.
I know where it goes and how it needs to be installed. Mine is one piece and part of it is hitting the AC compressor.
#57
RE: Turbo Upgrade Round 2
ORIGINAL: BaconBait
how the hell did you separate the flex section from the end pieces?
how the hell did you separate the flex section from the end pieces?
but I was not enough strong to align the oil pan screw holes and the retun line end. so I used clamps to adjust it.
You really need to use some force to do it.
It was so f**ing hard, I did not even put the gasket between the return line and oil pan.
#58
RE: Turbo Upgrade Round 2
I was able to get all the nuts and bolts on, but didn't tighten them because it looked like something was about to break.
edit- So you basically twisted the lower section to make it fit right?
edit- So you basically twisted the lower section to make it fit right?
#59
RE: Turbo Upgrade Round 2
ORIGINAL: BaconBait
I was able to get all the nuts and bolts on, but didn't tighten them because it looked like something was about to break.
I was able to get all the nuts and bolts on, but didn't tighten them because it looked like something was about to break.
#60
RE: Turbo Upgrade Round 2
ORIGINAL: BaconBait
edit- So you basically twisted the lower section to make it fit right?
edit- So you basically twisted the lower section to make it fit right?
if you mean twist by turning it 180°, then you connect the top end opposide way.