Flywheel Resurfacing Question and Dumbass of the Day PicS!
#1
Flywheel Resurfacing Question and Dumbass of the Day PicS!
Got the flywheel out tonight.. not much fun but not too difficult, it was slightly difficult to line up the holes to get the whole thing out but some of the DIY pics looked different than mine, some looked the same
do i send out this whole piece to southbend pictured below? the inside piece turns inside of the piece with the flywheel teeth..... some of the DIY pics show the inside piece removed??? i would think metal shavings would get inside of it also....
it has some hot spots in it but its still liquid smooth... some people said dont resurface it but i dont want to half *** it
on a side note, i saw some headlights out at my shop/ half mile runway tonight so i thought i might take a peak, i find this young dumbass unaware that my runway ends abruptly into a small ditch... probably a total, he asked me if the rear wheels were supposed to spin freely (on is in the air) i said, Hmm i dont think so, it looks bad
he was there to meet his girlfriend he said, he was twitching a couldnt look at me.. i told him to get the POS off my property before i had him arrested... kids these days
here is a pic of his vain attempt to stop
[url=http://www.audizine.com/gallery/showphoto.php?photo=31360]
do i send out this whole piece to southbend pictured below? the inside piece turns inside of the piece with the flywheel teeth..... some of the DIY pics show the inside piece removed??? i would think metal shavings would get inside of it also....
it has some hot spots in it but its still liquid smooth... some people said dont resurface it but i dont want to half *** it
on a side note, i saw some headlights out at my shop/ half mile runway tonight so i thought i might take a peak, i find this young dumbass unaware that my runway ends abruptly into a small ditch... probably a total, he asked me if the rear wheels were supposed to spin freely (on is in the air) i said, Hmm i dont think so, it looks bad
he was there to meet his girlfriend he said, he was twitching a couldnt look at me.. i told him to get the POS off my property before i had him arrested... kids these days
here is a pic of his vain attempt to stop
[url=http://www.audizine.com/gallery/showphoto.php?photo=31360]
#4
RE: Flywheel Resurfacing Question and Dumbass of the Day PicS!
yeah they are pimpness on that minivan... too bad the front one was knocked off!
i guess he was going to get him some in that minivan lol!
this is why its always good to have a camera!
i guess he was going to get him some in that minivan lol!
this is why its always good to have a camera!
#5
RE: Flywheel Resurfacing Question and Dumbass of the Day PicS!
if it's awd or rwd, he can just jackup the from passenger stick some wood under the wheel and just go buthis underbody might have damage lol. and sry i don't know anything about the flywheel hehe
#8
RE: Flywheel Resurfacing Question and Dumbass of the Day PicS!
If you do send it out to be resurfaced, just send the whole thing. Those flywheels can be machined but not much and theres a special procedure to machine the dual mass. In any case, with those hotspots i would just replace the flywheel. Once you overheat metal like that its really not the same. Thats kinda expensive thou.
Thread
Thread Starter
Forum
Replies
Last Post
somebody5788
B5 Models
15
01-11-2009 10:51 AM