Boosting 10 psi with mbc, Safe or not?
#34
RE: Boosting 10 psi with mbc, Safe or not?
bored from 81 to 83mm and getting completely rebuilt into a 2.0 with custom pistons, 2L AEG crank and scat rods.
Stock displacement 1786cc
New displacement 2008cc
Stock displacement 1786cc
New displacement 2008cc
#35
RE: Boosting 10 psi with mbc, Safe or not?
ORIGINAL: cincyTT
bored from 81 to 83mm and getting completely rebuilt into a 2.0 with custom pistons, 2L AEG crank and scat rods.
Stock displacement 1786cc
New displacement 2008cc
bored from 81 to 83mm and getting completely rebuilt into a 2.0 with custom pistons, 2L AEG crank and scat rods.
Stock displacement 1786cc
New displacement 2008cc
#39
RE: Boosting 10 psi with mbc, Safe or not?
I can tell you that you are most likely fine, as long as you have the stock k03. Allchips do is raise the rev limiter and change the setpoint where the n75 opens. I know this because a buddy of mine and I have a wideband setup on both of our cars, and he has the stock k03 running NO chip and 17 psi. The car still runs rich even up top. It does not really hold that to redline, but there is no issue with afr's....
#40
RE: Boosting 10 psi with mbc, Safe or not?
ORIGINAL: cincyTT
bored from 81 to 83mm and getting completely rebuilt into a 2.0 with custom pistons, 2L AEG crank and scat rods.
Stock displacement 1786cc
New displacement 2008cc
bored from 81 to 83mm and getting completely rebuilt into a 2.0 with custom pistons, 2L AEG crank and scat rods.
Stock displacement 1786cc
New displacement 2008cc
Thread
Thread Starter
Forum
Replies
Last Post
bmwtoaudi
Audi TT
11
12-09-2006 03:42 PM