Parting out a 2001.5 A6 (2.7T)
#1
02-02-2011 | 09:58 PM
Thread Starter
|
1st Gear
Joined: Mar 2008
Posts: 59
Parting out a 2001.5 A6 (2.7T)
Hello,
My 01.5 C5 A6 (2.7T) was totaled by another driver a few weeks ago so I am now parting it out. The front end is pretty much useless and the airbags deployed, cracking the windshield. However, the rest of the car is in great shape. It has a black exterior and interior.
I changed its oil with Mobil 1 Synthetic every 5,000 miles and it ran great. The engine has 111,000 miles on it. The ECU is tuned with the 93 octane APR program. I have both sets of wheels seen in the attached pictures (5 of the 17" OEM BBS RC wheels and 4 of the 18" ST100 BBS replica wheels which were only a few months old and are in brand new condition, with new tires)
I'm located in Philadelphia, PA and can be reached at omeara7@gmail.com.
My 01.5 C5 A6 (2.7T) was totaled by another driver a few weeks ago so I am now parting it out. The front end is pretty much useless and the airbags deployed, cracking the windshield. However, the rest of the car is in great shape. It has a black exterior and interior.
I changed its oil with Mobil 1 Synthetic every 5,000 miles and it ran great. The engine has 111,000 miles on it. The ECU is tuned with the 93 octane APR program. I have both sets of wheels seen in the attached pictures (5 of the 17" OEM BBS RC wheels and 4 of the 18" ST100 BBS replica wheels which were only a few months old and are in brand new condition, with new tires)
I'm located in Philadelphia, PA and can be reached at omeara7@gmail.com.
#2
02-13-2011 | 07:35 PM
Thread Starter
|
1st Gear
Joined: Mar 2008
Posts: 59
Unfortunately, I didn't receive much interest so I am having my insurance company take the car and not subtract the salvage value...so I am no longer parting this car out.
#3
02-17-2011 | 02:25 PM
1st Gear
Joined: Sep 2010
Posts: 7
From: PA
That's too bad, i could have used some of the parts!
#4
02-18-2011 | 02:27 AM
1st Gear
Joined: Feb 2011
Posts: 23
From: wisconsin
that is too bad I could have used both sets of wheels and some interior. Sucks about your car to looked like a nice 1
#5
02-20-2011 | 10:30 AM
1st Gear
Joined: Aug 2010
Posts: 31
From: Columbus, OH
Did they take both sets of wheels? I would be interested in the 18s if you still have them...
#6
03-28-2011 | 08:33 PM
1st Gear
Joined: Mar 2011
Posts: 27
I could have use some parts off that car.
#7
03-28-2011 | 11:08 PM
Thread Starter
|
1st Gear
Joined: Mar 2008
Posts: 59
Yea but there wasn't enough interest so I had the insurance company take it. I did pull the ECU (318HP/382TQ tune with receipt) and have the 18" wheels still which are in brand new condition. I have 1 of the factory 17" wheels which has some curb rash and had bought the full timing belt kit but never got to install it. PM me if anyone's interested in any of that.
#8
10-26-2011 | 10:49 PM
Thread Starter
|
1st Gear
Joined: Mar 2008
Posts: 59
My ECU has been programmed with the stock program and APR's 91 and 93 octane pump gas, and 100 octane race gas programs. It also has valet mode, and the DTC (Diagnostic Trouble Codes) clear -- all through the cruise control stalk. This has been coded (immobilizer defeat) so it will work on any Audi with the 2.7T engine. My A6 was a 6-speed but I had it tuned for automatics since there's probably more of them out there so this is for autos only.
I still have the 18" wheels and am asking $800 for them (I paid a little over a grand for them). They don't have any scratches on them.
I'm in the Philadelphia area.
I still have the 18" wheels and am asking $800 for them (I paid a little over a grand for them). They don't have any scratches on them.
I'm in the Philadelphia area.
Thread
Thread Starter
Forum
Replies
Last Post
luxuryimports1
Archive - Engine/Performance Parts
31
10-21-2009 05:01 PM
