DXD southbend stage 3 or 4 DISK ONLY: (stage 4 uses the same disk, but has a stronger pressure plate) this is good for anyone looking to replace a worn out clutch or has a pressure plate they want to use with it.

"A Feramic full face lining on the flywheel side and a "Medium Metal" content Organic lining on the pressure plate side. This combination runs cooler and significantly extends clutch life."

this disk is for use with a stock dual mass flywheel (it is unsprung), its brand new, never been out of the package. if you need pics let me know.

i bought a southbend clutch kit and my plans have changed from using the stock flywheel to a light weight steel flywheel so i need a sprung disk. for sale is the clutch disk only, no pressure plate, bearings or anything else.

a new disk is around $230 from DXD, im charging $225 shipped or 200 cash picked up.

 

ttt...

 

bump... someone has to need a new disk eventualy. dont make me list it on ebay.

 

to the top...

i also have a brand new walbro 255 in tank fuel pump im not going to be using, still in the plastic bag. $90 shipped. if you really need pics il get some. save 10 bucks + shipping off of buying it from anywhere else.

also have a spare 1.8t crankshaft from a 058 block, in good condition im not using either. $40 and you pay shipping.

 

damn i really need a new clutch in my 99 2.8 qm. except after replacing a few tires i am running low on cash. but when i find some change laying around and if u still got the clutch ill give you a call

 

sounds good. just remember this is the clutch disk only. not the pressure plate or anything else. i do have the whole kit, i really just need to sell the disk so i can buy a different style, i didnt want to have to re-buy the entire package, but i offered someone else $570 shipped for the whole kit (i paid $585+s&h for it, mike@DTH sells them for $584 shipped, its all still brand new, in box). that includes the pilot bearing, alignment tool, pressure plate and clutch disk. if you just need the disk though its priced as i said in post #1 and i would prefer to sell the disk only just to save some money on shipping the large piece of metal. just shoot me a PM if you need either of those.