Intake, Headers and ExhaustCustom Exhaust? New Headers? Need Opinions on Intakes? Discuss making your ride breathe better here.
Welcome to Audi Forums!
Welcome to Audi Forums,
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I have repaired several flex pipes on the 2.8s. You can order the flex joints from Vibrant performance. I used the 2.25 inch by 4 for the 2.8. cut the old one out with a sawz all and mig in the new one. Total time per side: about 1.5 hours with out a lift. Total cost: about 25 dollars. Not having to replace a cat: Priceless!!!
I am not aware of the pipe sizing for the 3.0. However, the concept is still the same. If you only need the flex portion of the pipe, measure the outside diameter of the pipe and the overall length of the flex joint, and replace it. Not so hard!